manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 401 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 401

Operation

Accessories for Patient Positioning

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

D.4-17

0.0

Using the head-arm support

D.4

✧

The head-arm support is used for a comfortable position-
ing of the patient with his or her arms crossed above the 
head. It can be placed directly on the patient table wher-
ever you want (head end/foot end or on the table top 
extension). The head-arm support is supplied with a flat 
cushion, which can be placed inside. For better immobiliza-
tion the support has Velcro straps on both sides. Here, you 
can fix the patient’s hands.

i

D.4

These supports are not recommended for head and neck exam-
inations.

D.4

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments