manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 288 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 288

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Use of Storage Media

System Handling

C.3-10

Use of USB Devices  

C.3

To provide the maximum storage space, USB devices must be 
NTFS formatted.

C.3

Only raw data can be imported from USB devices. The transfer 
of raw data can be performed as a background process and is 
started via File Browser.

C.3

i

.3

C

For instructions using the USB device please refer to the opera-
tor manual of the USB device manufacturer. More information 
can be obtained via internet.

C.3

Insertion and removal

C.3

Inserting a USB device

C.3

✧

Insert the USB device into the USB port at the front of the 
computer.

The operating system recognizes the USB device.

C.3

Removing a USB device

C.3

✓

Reading or writing from or to the USB device has been com-
pleted.

✧

Pull the device out of the USB port.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments