manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 429 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 429

Maintenance

Maintenance and Service

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

E.1-3

0.0

Maintenance contract

E.1

On request, you can have maintenance work performed regu-
larly by the Siemens Customer Service.

E.1

✧

Please contact your Siemens Service to agree on a mainte-
nance contract for your system.

Maintenance intervals

E.1

E.1

✧

For further information on maintenance and maintenance 
intervals, please consult: 

(→

System Owner Manual)

E.1

CAUTION

E.1

Missing maintenance of the scanning system!

E.1

Scan abortion or reduced image quality due to malfunction of the 
scanner.

E.1

✧

Make sure that maintenance is performed at the recom-
mended intervals. 

✧

Check the imaging performance with the monthly con-
stancy test.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments