manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 563 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 563

Glossary

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

O-15

0.0

Scan time

O.0

Period in which radiation is released during a CT scan.

O.0

Scan

O.0

CT acquisition of a slice.

O.0

Scatter radiation

O.0

Radiation whose direction of dispersion is modified through the 
interaction with a material.

O.0

Secondary slice

O.0

Calculation of a selectable slice from a series of adjacent or 
overlapping slices.

O.0

Sequence CT

O.0

Scanning technique with single scans and optional table feed 
between the scans.

O.0

Slice thickness

O.0

Thickness of slice to be reconstructed. The slice thickness deter-
mines the collimation during scanning.

O.0

Software

O.0

Programs of a computer.

O.0

Spiral CT

O.0

Scanning technique with continuous rotation, continuous data 
acquisition and continuous table travel.

O.0

SSD

O.0

S

haded 

S

urface 

D

isplay: Rendering technique for the 3D surface 

construction ; only 

voxels

 the 

CT values

 of which exceed a 

defined threshold value are considered.

O.0

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments