manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 337 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 337

Operation

Function Tests

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

D.2-3

0.0

Checking the table top

D.2

You must check the mobility and cleanness of the table top.

D.2

✧

Make sure that you can manually retract the table top from 
the gantry. 

(→

Page C.2-9 

Retracting the patient table 

manually

)

✧

Make sure that the scan field is free of residual contrast 
medium, blood or other contaminations.

Checking the laser light marker

D.2

D.2

✧

Switch on the laser light marker and check the projections 
of the light beams on a white sheet of paper.

The laser beam must project a line.

D.2

f B

D.2

The laser light marker does not work.

D.2

✧

Stop scanning to rule out any danger to patients.

✧

Call Siemens Customer Service.

D.2

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments