manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 162 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 162

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Software Related Safety Information

Safety

A.4-68

Exporting and recording off-line files

A.4

You can copy one or several data objects to specific enabled 
directories of the system hard disk or within the network.

A.4

All files, e.g., images in BMP format and sequences of images in 
AVI format, exported previously to a specific directory can be 
recorded automatically on CD-R. The path of this specific direc-
tory is configurable by service personnel but the default path is 
“H:\sitedata\offline”.

A.4

A.4

A.4

CAUTION

A.4

Using other than configured directory for CamTasia data files!

A.4

Data disk is full and no further examination possible. Files can not 
be deleted by the user any more.

A.4

✧

Use only the configured directory for saving the CamTasia 
data files.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments