manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 161 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 161

Safety

Software Related Safety Information

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

A.4-67

0.0

Rearranging patient and examination data

A.4

The images of a patient are grouped together by examination 
and series into hierarchical groups. If you find that the structure 
is not correct, you can regroup the examinations and series by 
moving them.

A.4

A.4

A.4

CAUTION

A.4

Correcting/rearranging not all objects with references!

A.4

References may be lost.

A.4

✧

Rearrange the entire hierarchical group containing all 
objects with references in order to maintain the references.

✧

Only references found within the selection will be adapted.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments