manualshive.com logo in svg

Siemens SITRANS FC430, Operating Instructions Manual

Share
Download
Siemens SITRANS FC430 Operating Instructions Manual Download Page 85

5. Connect ground to terminal   and power to terminals L/+ and N/- in the manner shown 

below at right using a screwdriver.

)

①

L/
+

 

②

N/
-

 

③

 Protective Earth (PE)

AC connection

DC connection

/
1

/
1

/

 

Power: 100 to 240 V AC, 47 to 63 Hz

/

1

/

 

Power: 19.2 to 28.8 V DC

6. Mount power supply protection cover and fasten protection cover screw.
7. Tighten cable gland.

5.2.2.10

Finishing the transmitter connection

Connection check-up

1. Check individual wire installation by tugging firmly.
2. Firmly tighten cable glands and insert blanking plugs in unused cable entries.
3. Close lid.
4. Tighten the four spring screws.
5. Ensure that moisture does not penetrate to inside of electronics enclosure.

Connecting

5.2 Connecting FC430

FC430 (From firmware 4.0)

Operating Instructions, 06/2017, A5E39789392-AA

85

Summary of Contents for SITRANS FC430























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands