manualshive.com logo in svg

Siemens SITRANS FC430, Operating Instructions Manual

Share
Download
Siemens SITRANS FC430 Operating Instructions Manual Download Page 130

Level 1 of the navigation view (entered from the operation view) is standardized for all Siemens 

Process Instrumentation devices and covers the following groups:
1. Quick Start (menu): Lists the most important parameters for quick configuration of the 

device. All parameters in this view can be found elsewhere in the menu.

2. Setup (menu): Contains all parameters which are needed to configure the device.
3. Maintenance & Diagnostics (menu): Contains parameters which affect the product behavior 

regarding maintenance, diagnostics and service.

Examples: Verification, failure prediction, device health, data logging, alarm logging, report, 

condition, monitoring, tests, etc.

4. Communication (menu): Contains parameters which describe the Profibus, Profinet, HART, 

Modbus, X-bus communication settings of the device.

5. Security (menu): Contains parameters which describe all security settings of the device.
6. Language (parameter): Parameter for changing the language of the HMI. Regardless of 

the language setting, the term for this parameter is always the English term (Language).

5

1

2

3

4

①

List of menus and parameters

②

Name of the previously selected menu

③

Menu item number of highlighted menu

④

Alarm status text

⑤

Alarm icon

Figure 7-2

Example of display in navigation view

Menu item

In navigation view menus are identified by an arrow in the most right position.
When a menu is selected, the background turns black.

Figure 7-3

Menu in navigation view "Quick start" selected "Setup" not selected.

For further information on how to gain access to the menus, see Access control (Page 121).

Operating FC430
7.1 Operating instructions

FC430 (From firmware 4.0)

130

Operating Instructions, 06/2017, A5E39789392-AA

Summary of Contents for SITRANS FC430























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands