Use the and keys to highlight the desired HMI wizard and press right key to enter the
wizard. The first view shows a short description of which settings can be done.
Key operation
Basic navigation in the HMI wizards is shown in the graphics.
To change settings, use the and keys to highlight wanted setting, then press key to
select. Confirm selection by pressing key again.
When you reach the end of the wizard, e.g. "Process Values wizard is now finished", press
key to go back to wizard list.
Commissioning
6.3 Local commissioning
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
105
