manualshive.com logo in svg

Siemens SITRANS FC430, Operating Instructions Manual

Share
Download
Siemens SITRANS FC430 Operating Instructions Manual Download Page 47

4.2.1.3

Turning the transmitter (remote version)

In a configuration with external DSL the transmitter can be turned horizontally and tilted 

vertically.     

Horizontal rotation

1. Unscrew cap from lock screw.
2. Loosen lock screw at transmitter pedestal using 5 mm Allen key.
3. Carefully rotate transmitter into desired position.

r

r

4. Firmly tighten lock screw (torque: 10 Nm).
5. Replace cap onto lock screw (torque: 10 Nm).

Installing/mounting

4.2 Installation instructions

FC430 (From firmware 4.0)

Operating Instructions, 06/2017, A5E39789392-AA

47

Summary of Contents for SITRANS FC430























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands