5. Please wait…
6. Copy/restore parameterization - succeeded.
Press right key to continue…
Or:
Copy/restore parameterization - failed.
Press right key to continue…
8.13
Datalogging on sensorFlash
Datalogging of process values can be activated under menu items 3.7 - SensorFlash
Data logging can be selected in different logging intervals for Process values and for advanced
logging of parameters.
Values with timestamp information is stored on the SensorFlash
8.14
Process peak values on sensorFlash
Process peak values can be activated under menu items 3.5 - peak values
Minimum and maximum process peak value is stored with timestamp information on the
SensorFlash, and also under menu items 3.5
8.15
Simulation
Simulation is used for testing purposes, typically for checking that the readings of the control
system are correct.
The simulation can be activated in HMI (menu item 3.8) or via SIMATIC PDM.
Inputs/outputs simulation
Depending on the configuration of each input/output the following values can be simulated:
Table 8-5
Inputs/outputs simulation
HW configura‐
tion
Channel 1
Channel 2
Channel 3
Channel 4
Simulation value
Current output
●
4 to 20 mA
Relay output
●
●
0 (low) or 1 (high)
Signal input
●
●
0 (low) or 1 (high)
Signal output
● Current
● Pulse
● Frequency
● Status
●
●
●
● 0 to 25 mA
● 0 to 12.5 kHz
● 0 to 12.5 kHz
● 0 (low) or 1 (high)
Functions
8.15 Simulation
FC430 (From firmware 4.0)
180
Operating Instructions, 06/2017, A5E39789392-AA
