manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 365 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 365

3RP10, 3RP15 solid-state time relays

SIRIUS System Manual

GWA 4NEB 430 0999-02b

7-21

Sealable cover

All 3RP15 solid-state time relays can be secured against unauthorized 
adjustment by means of a sealable cover (3RP19 02). The following table 
and illustration explain how to do this:

Table 7-6: Sealable cover

Push-in lugs for screw-
type attachment

Push-in lugs (3RP19 03) are available for the screw-type attachment:

Figure 7-17: Screw-on attachment

Illustration

Procedure

1

Break off the key for interlocking from 

the upper edge of the cover.

2

Use the hook to put the cover in the 

openings to the side of the device iden-
tification label.

3

Move the cover toward the time relay.

4

Hook the key onto the time relay 

through the slit in the cover to attach 
the cover to the time relay.

5/6 

Pull the seal through the opening of 

the key.

3RP19 02

1

2

3

4

5

6

3RP19 03

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments