manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 327 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 327

3RH, 3TX, LZX coupling links

SIRIUS System Manual

GWA 4NEB 430 0999-02b

6-7

6.2.4 Coupling links for direct attachment

Contactors S0 to S3

The 3RH1924-1GP11 coupling relay, which is screwed directly onto the coil 
terminals, is available for direct attachment to the contactors of frame sizes 
S0 to S3.
The 3TX4090-0C/-0D coupling links are suitable for attachment to 3TH42/43
auxiliary contactors.

Contactors of up to 
450 kW

In the case of the large contactors of up to 450 kW (size 14), the 3TX7090 
coupling link can be snapped on at the side like an auxiliary switch block, 
and the wires are connected to the contactor coil terminals.

Variants

There are variants with one normally open contact, 24 VDC, with and with-
out surge suppression.
The operating range is 17 to 30 VDC.

Installation

The 3TX 4090 and 3RH1924-1GP11 coupling links are screwed directly onto 
the contactor coil terminals, and the 3TX7090 coupling links are snapped on 
at the side like the auxiliary switches.

Surge suppression

The following coupling links have an integrated surge suppressor (varistor) 
for the contactor coil to be switched:
• 3RH1924-1GP11
• 3TX4090-0D
• 3TX7090-0D

Power consumption

Following on from the technical specifications of the electronic systems, the 
coupling links have low power consumption.

LED

An LED is integrated in the coupler.

6.2.5 SIRIUS contactor relays

The SIRIUS 3RT10/3RH11 contactor relays are described in Chapter 3, "Con-
tactors".

6.2.6 Installation

Attachment

Snap-on attachment

The coupling links can be snapped onto a 35 mm rail in acc. with 
DIN EN 50 022.
Screw-on attachment is not possible.

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments