manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 334 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 334

3RH, 3TX, LZX coupling links

SIRIUS System Manual

6-14

 

GWA 4NEB 430 0999-02b

6.5 Mounting and connection

6.5.1 Mounting

Snap-on attachment

The coupling links are snapped onto 35 mm rails in acc. with EN 50 022.
With a vertical rail and tightly packed devices, the permissible ambient tem-
perature T

U

 is 60° C.

Any installation position is possible.

6.5.2 Connection

The coupling links are available with the SIGUT

 terminal system, with 

screw-type terminals, or with Cage Clamp terminals.

Cage Clamp terminals

Important
Risk of injury

When making connections using the Cage Clamp terminal system, you 
should support your screwdriver with your finger to prevent the screwdriver 
slipping.

Figure 6-6: Cage Clamp terminals, coupling links

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments