manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 194 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 194

3RT1/3RH1 contactors

SIRIUS System Manual

3-86

GWA 4NEB 430 0999-02b

3.5 Mounting and connection

3.5.1 Mounting

Note

Note the following when mounting the cover:
• If foreign bodies, such as wood shavings, can get into the device, the con-

tactors must be covered during installation.

• If there is a danger that dirt or dust could be present, or if there is a corro-

sive atmosphere, the contactors must be installed in a housing.

• Dust deposits must be vacuum cleaned.

Attachment
options

The attachment options for the contactors are uniform. 

Table 3-34: Attachment

Screw-on attachment

Figure 3-67: 3RT: Screw-on attachment (frame size S00)

Frame size Installation

Removal

S00 to S3

Screw-on attachment

Removed with a screwdriver

S00, S0

Snapped onto a
35 mm rail (in acc. with 
EN 50 022)

 

Removed without a tool

S2, S3

Snapped onto a
35 mm rail (in acc. with 
EN 50 022)

The snap-on spring can be opened with a 
screwdriver

 S3

Snapped onto a
75 mm rail

M4

The 3RT1 contactors can be screwed 
onto a flat surface.
• With 2 M4 screws, diagonal
• Maximum tightening torque 2 Nm
• Washers and spring lock washers must 

always be used

• The distance to grounded parts at the 

side must be more than 

 

6 mm

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments