manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 362 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 362

3RP10, 3RP15 solid-state time relays

SIRIUS System Manual

7-18

 

GWA 4NEB 430 0999-02b

The 3RP15 40 solid-state time relay without auxiliary supply

The time relay is available with either 1 or 2 changeover contacts.

Time ranges

Seven time ranges can be set by means of a rotary switch. Times ranging 
from 0.05 to 100 s are possible.

Important

Changes to the time range are only effective if they are made in a deenergi-
zed state.

Function diagrams

The function diagram for the time relay with 1 changeover contact and with 
2 changeover contacts:

Figure 7-12: 3RP15 40 function diagram

Mode of operation

When the rated control supply voltage is applied, the time relay switches 
over. After the rated control supply voltage has been disconnected, the runt-
ime t starts. After t has finished, the relay switches back to the quiet state.
If the minimum on-time is not adhered to, it is ensured that either the timing 
period will not start or that a started timing period will always be properly 
completed.
Intermediate states in the function process, such as the relay getting stuck, 
are successfully prevented.

7.3.5 Clock pulse generator (3RP15 55 solid-state time relay)

Description

The idle time and the pulse time of the clock pulse generator and the time 
ranges must be set separately.
The pulsing function begins with the break.

The time relay contains a changeover contact.

Time ranges

Fifteen time ranges can be set by means of a rotary switch.

Important

Changes to the time range are only effective if they are made in a deenergi-
zed state. A pulse, for example, can be output cyclically for 1 second after a 
break of 1 hour.

Off-delay

OFF DELAY

25/28

25/26

A1/A2

15/18

15/16

2

Off-delay

OFF DELAY

A1/A2

15/18

15/16

2

2 changeover contacts

1 changeover contact

25/28

25/26

A1/A2

15/18

15/16

2

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments