manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 21 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 21

System overview

SIRIUS System Manual

GWA 4NEB 430 0999-02b

1-5

1.2 Overview: Range of devices

SIRIUS system

The SIRIUS product range consists of 3RV circuit breakers, 3RT contactors, 
3RH/3RT auxiliary contactors and contactor relays, 3RU thermal overload 
relays, 3RB10/3RB12 electronic overload relays, 3RP time relays, 3RW3 
semiconductor motor control devices (referred to below as soft starters), 
and combinations of these devices, which form the 3RA load feeders.

The individual devices are developed and built in such a way that it is very 
easy to put them together to make load feeders. This is possible because 
the devices are all built to work together on both an electrical and a mechan-
ical level.

Figure 1-1: SIRIUS system

NSB00296

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments