manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 20 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 20

System overview

SIRIUS System Manual

1-4

 

GWA 4NEB 430 0999-02b

DMT-BVS

The DMT-BVS is, like the PTB, a certified German testing organization in 
compliance with the EU directive 76/117/EEC and EIExV. Like the PTB and 
other testing institutes in Europe, the DMT-BVS tests and awards certifi-
cates in acc. with the explosion protection directive 94/9/EC and is accred-
ited accordingly.
Over 100 years ago, the DMT-BVS became the first testing station for explo-
sion protection in Germany, and it has been a testing station for electrical 
equipment as well since 1912. DMT-BVS certificates are recognized through-
out the world. For support in export matters, the DMT-BVS works with the 
chemical industry and is of course recognized by it.

KEMA

KEMA, which is a testing institute that enjoys worldwide recognition, is a 
certified European institute with many years of experience of testing for 
explosion protection.
For support in export matters, KEMA also works with testing stations 
throughout the world.

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments