manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 33 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 33

System overview

SIRIUS System Manual

GWA 4NEB 430 0999-02b

1-17

1.5.2 Screw-type terminals

The terminals used do not vary within a frame size. The current switched by 
the different devices of a single frame size does not vary either. This means 
you can use the same tool, torque, and conductor cross-section for the cir-
cuit breakers, contactors, and overload relays of a single frame size. The 
stripped lengths are also the same. This is important in the case of prefabri-
cated wiring.

Screw-type terminals

All the devices have screw-type terminals, either a terminal with a top 
washer or a box terminal, depending on the frame size.
Devices with frame sizes S00 and S0 have terminals with captive screws 
and terminal washers that enable you to connect 2 conductors, even if they 
have different cross-sections.
The box terminals of frame size S2 and S3 can also take 2 conductors with 
different cross-sections.

Connection tools

Use the following tools to make the connection:
• Frame sizes S00 to S2: Screws are available for rated currents of up to 

50 A for Pozidriv2 screwdrivers.

• Frame size S3: To obtain the required torques for the frame size for up to 

100 A, the screws have a 4 mm hexagon socket.

The screwdriver guides allow screwdriving machines to be used.

Lugs and connecting 
bars

You can remove the box terminals from the devices with a frame size of S3 
to connect conductors with lugs or connecting bars. A terminal cover is 
available as shock protection and to ensure that you comply with the 
required creepages and clearances when the box terminals are removed. 
You can find a detailed description in section n.4 on accessories.

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments