manualshive.com logo in svg

Siemens SIREMOBIL Compact L, Service Instructions Manual, Page: 73 / 86

Share
Download
Siemens SIREMOBIL Compact L Service Instructions Manual Download Page 73

Replacing boards / replacing components

6 - 21

Siemens AG

 

SPR2-130.061.02

Page 21 of 28

SIREMOBIL Compact

Medical Solutions

Rev. 11

09.04

CS PS 24

System Manual

 

•

Configure the following parameters in User setup for MEMOSKOP:

Monitor text

Configure Yes.

Maximum image number

Configure 700.

Disable dose rate selection 
in user setup

Set to "No" if equipped with an area dose product mea-
surement device. Menu "Storage of Dose on Disk" and 
menu "Dose on Hardcopy output" in User Setup are vis-
ible. Otherwise, set to "Yes".

Unit serial number

Program the serial number of the SIREMOBIL Compact, 
Do not enter the first zero. 

Default LUT

Configure 2. Only upon customers request program a 
different LUT curve.

Default Edge

Configure 1. Only upon customers request program a 
different. Edge enhancement value

Software backward compatible Configure No.

Product name

SIREMOBIL Compact (default). If wrong, configure 
"SIREMOBIL Compact".

Default Program changeable

Default: Yes.
Depending on country specific regulations, configure 
Yes or No.

Create External disk

If a MOD-drive is present or the option "DICOM bridge" 
is installed, configure Yes. Without MOD drive or 
DICOM bridge, configure No.

Enable Bridge

If the option "DICOM bridge" is installed, configure Yes. 
Otherwise configure No.

Operating mode Parameters

Change the programmed parameters only upon cus-
tomer request.

VCR output

Configure to monitor A.

Hardcopy Release

For SIREMOBIL Compact with 1 monitor: 
configure to monitor A.
For SIREMOBIL Compact with 2 monitors:
Configure to monitor B.

Text monitor

For SIREMOBIL Compact with 1 monitor:
configure to monitor A.
For SIREMOBIL Compact with 2 monitors:
configure to both monitors.

Split screen

Configure horizontally. Configure vertically only upon 
customer request.

Display of time

Configure Yes.

Set Date Time

Set the current date and time.

Summary of Contents for SIREMOBIL Compact L























































































Reviews:

No comments