manualshive.com logo in svg

Siemens SIREMOBIL Compact L, Service Instructions Manual, Page: 70 / 86

Share
Download
Siemens SIREMOBIL Compact L Service Instructions Manual Download Page 70

SIREMOBIL Compact

 

SPR2-130.061.02

Page 18 of 28

Siemens AG

System Manual

Rev. 11

09.04

CS PS 24

Medical Solutions

6 - 18

Replacing boards / replacing components

 

•

Configure the following parameters in User setup for MEMOSKOP:

Display of realtime clock

Configure Yes. Select No only upon customer request.

Display of rotated image

Configure Yes.

Monitor zoom

Configure No.

Monitor split

Configure Yes.

Monitor text

Configure Yes.

Maximum image number

Configure 100.

Disable dose rate selection 
in user setup

Set to "No" if equipped with an area dose product mea-
surement device. Menu "Storage of Dose on disk" and 
menu "Dose on Hardcopy output" in User setup are visi-
ble. Otherwise, set to "Yes".

Unit serial number

Program the serial number of the SIREMOBIL Compact.
Do not enter the first zero. 

Product name

SIREMOBIL Compact (default). If wrong, configure 
"SIREMOBIL Compact".

Default Program changeable

Default: Yes.
Depending on country specific regulations configure Yes 
or No.

Create External disk

Configure No.

Default LUT

Configure 2. Program a different LUT curve only upon 
customer request.

Default edge

Configure 1. Program a different Edge enhancement 
value only upon customer request.

Software backward compatible Configure No.

Operating mode Parameters

Change the programmed parameters only upon cus-
tomer request.

VCR output

Configure to monitor A.

Hardcopy Release

For SIREMOBIL Compact with 1 monitor: 
configure to monitor A.
For SIREMOBIL Compact with 2 monitors:
Configure to monitor B.

Text monitor

For SIREMOBIL Compact with 1 monitor:
configure to monitor A.
For SIREMOBIL Compact with 2 monitors:
configure to both monitors.

Split screen

Configure horizontally. Configure vertically only upon 
customer request.

Display of time

Configure Yes.

Set Date Time

Set the current date and time.

Summary of Contents for SIREMOBIL Compact L























































































Reviews:

No comments