manualshive.com logo in svg

Siemens SIREMOBIL Compact L, Service Instructions Manual, Page: 67 / 86

Share
Download
Siemens SIREMOBIL Compact L Service Instructions Manual Download Page 67

Replacing boards / replacing components

6 - 15

Siemens AG

 

SPR2-130.061.02

Page 15 of 28

SIREMOBIL Compact

Medical Solutions

Rev. 11

09.04

CS PS 24

System Manual

 

MEMOSKOP C-E

•

Replace the MEMOSKOP C-E.
The attachment screws are on the underside of the storage device.

•

Check the software status of the MEMOSKOP. Download the system software status to 
the MEMOSKOP if necessary.

•

Use the MEMOSKOP Service Software to import the language file.

•

Configure the MEMOSKOP C-E for the correct video frequency and the number of moni-
tors present.
Refer to Chapter 5 "MEMOSKOP C-E without Keyboard, Emulation ...", "Configuring the 
Video frequency" and "MEMOSKOP-Configuration for the number of existing monitors".

•

Configure the following parameters in Technical Setup for the MEMOSKOP:

Check the software status of the newly delivered MEMOSKOP. 
If the software status of the MEMOSKOP differs from that of the 
system, the system software status must be downloaded to the 
MEMOSKOP. The MEMOSKOP software status is displayed in the 
2nd line of the User Setup. The first number describes the 
MEMOSKOP type (2=CE; 3=CE-100/ C/ C & MOD; 4=C-SUB/ C-SUB 
& MOD).

Read and record the parameters for MEMOSKOP C-E if you are 
able to select User setup. After replacing the MEMOSKOP, con-
figure the MEMOSKOP C-E according to the parameters recorded.

Number of monitors

Configure 1 for SIREMOBIL Compact with 1 monitor.
Configure 2 for SIREMOBIL Compact with 2 monitors.

Hardcopy 

Check whether 5000 is programmed in "4 Max Hard-
copy time". If not, program this value.

Edge 1 coef set

Check whether 3 is programmed, if not, program this 
value.

Edge 2 coef set

Check whether 8 is programmed, If not, program this 
value.

Motion detection setup

Check whether the following are programmed MD1: 
Threshold 100 and with MD2: Threshold 120. 
If not, program these values.

Date / Time format

Set to country-specific format.

Keyboard

Set to the keyboard layout being used.

Display of realtime clock

Configure Yes. Configure No only upon customer 
request.

Display of rotated image

Configure Yes.

Monitor zoom

Configure No.

Default LUT

Configure 2. Program a different LUT curve only upon 
customer request. 

NOTE

NOTE

Summary of Contents for SIREMOBIL Compact L























































































Reviews:

No comments