manualshive.com logo in svg

Siemens SIREMOBIL Compact L, Service Instructions Manual, Page: 37 / 86

Share
Download
Siemens SIREMOBIL Compact L Service Instructions Manual Download Page 37

Adjustments / Programs

5 - 15

Siemens AG

 

SPR2-130.061.02

Page 15 of 30

SIREMOBIL Compact

Medical Solutions

Rev. 11

09.04

CS PS 24

System Manual

 

Collimator displays on the monitor

5

Prerequisites

5

•

Camera rotation, collimators for X-Iris and slot diaphragm have been set correctly.

Collimator display, X-Iris 

5

•

Connect the service PC to the serial interface of the SIREMOBIL.

•

Start the service program.

•

Select the "Adjustment, Calibrations..." menu.

•

Respond to the query with "Yes".

•

Select "Screen Display Collimator" in the "Function Groups:" combo box.

Start adjustment

•

In the "Available Functions:" window select "Init" and click on "Execute". The X-Iris is au-
tomatically opened to full format and the slot diaphragm is opened to maximum aperture.

Full format, X-Iris open

•

Zoom must be disabled.

•

Release fluoro and wait until generator has performed automatic adjustment.

•

Switch fluoro off. The X-Iris is displayed on the monitor.

•

Use the keys for opening and closing the X-Iris to set the diameter of the superimposed 
circle to the size of the X-iris.

•

In the "Available Functions:" window select "Open Pos - II. Full Format" and click on "Ex-
ecute".

•

Close the status window by clicking on the OK button.

•

For the query "Do you want to reset the unit", click on "No". The X-Iris is automatically 
closed to the smallest format.

Full format, X-Iris closed

•

Briefly release fluoro. The X-Iris is displayed on the monitor.

•

Use the keys for opening and closing the X-Iris to set the diameter of the superimposed 
circle to the size of the X-Iris.

•

In the "Available Functions:" window select "Close Pos - II. Full Format" and click on "Ex-
ecute".

•

Close the status window by clicking on the OK button.

•

For the query "Do you want to reset the unit", click on "No".

X-ray radiation!
See Chapter 1, Safety Information.

Protect yourself against radiation exposure. Wear a lead apron.

WARNING

Summary of Contents for SIREMOBIL Compact L























































































Reviews:

No comments