manualshive.com logo in svg

Siemens SIREMOBIL Compact L, Service Instructions Manual, Page: 39 / 86

Share
Download
Siemens SIREMOBIL Compact L Service Instructions Manual Download Page 39

Adjustments / Programs

5 - 17

Siemens AG

 

SPR2-130.061.02

Page 17 of 30

SIREMOBIL Compact

Medical Solutions

Rev. 11

09.04

CS PS 24

System Manual

 

Slot diaphragm

5

Prerequisites

5

•

The setting of the camera rotation is correctly adjusted and is in the 0° position.

•

Connect the service PC to the serial interface of the SIREMOBIL.

•

Start the service program.

•

Select the "Adjustments, Calibrations..." menu. Answer the query with "Yes".

•

Select "SCREEN DISPLAY SLOT DIAPHRAGM" in the "Function Groups:" combo box.

Disable circle mask

•

Switch off zoom.

•

In the "Available Functions:" window, select "DISABLE CIRCLE MASK" and click on "Ex-
ecute". Close the status window by clicking on the OK button. 
For the query "Do you want to reset the Unit", click on "No".

Start adjustment

•

In the "Available Functions:" window select "INIT" and click on "Execute". Close the sta-
tus window by clicking on the OK button.
For the query "Do you want to reset the Unit", click on "No".

Full format, slot diaphragm open

•

Move the camera into the 0 degree position. 
The X-Iris opens to survey format. To open it further, use the keys for opening the X-Iris. 
The slot diaphragm is opened automatically. 

•

Apply fluoro briefly.

•

Open and close the slot diaphragm display via the keys.

•

Align the lines shown on the monitor with the front edges of the slot diaphragm blades. 

•

In the window "Available Functions:" select "Slot Diaphragm Open Pos - I.I. Full Format" 
and click "Execute".

•

Close the status window by clicking on the OK button.

•

Respond to the query "Do you want to reset the unit" by clicking "No". The slot dia-
phragm is closed automatically.

Full format, slot diaphragm closed

•

Apply fluoro briefly. 

•

Open and close the slot diaphragm display via the keys. 

•

Align the lines shown on the monitor with the front edges of the slot diaphragm blades. 

•

In the window "Available Functions:" select "Slot Diaphragm Close Pos - I.I. Full Format" 
and click "Execute".

•

Close the status window by clicking on the OK button.

Use the lowest KV values possible to ensure optimal detection of 
the front edges of the slot diaphragm blades.

NOTE 

Summary of Contents for SIREMOBIL Compact L























































































Reviews:

No comments