Siemens SINAMICS G120 Installation Manual Download Page 20

Page: 20 / 176

Introduction

Power Module PM240-2

Hardware Installation Manual, 01/2020, A5E33294624B AL

STO independent of the Control Unit

Using the PM240-2 Power Modules, frame sizes FSD, FSE, FSF and FSG, you can

implement the "Safe Torque Off" safety function (STO), corresponding to PL e according to

EN 13849-1 and SIL 3 according to IEC61508.

STO via Power Module terminals (Page 63)

Note that when using the STO function, the mission time of the converter is restricted. For

more information, see the "Safety Integrated" Function Manual.

Manuals for your converter (Page 163)

Permissible motors

Note
Motors for converter operation
Only use motors that are suitable for operation with converters with a DC link.

Motors for 200 V Power Modules
For the 200 V Power Modules, induction motors are permissible in the range from

25% … 150% of the converter power without any restrictions.

Motors for 400 V Power Modules
For the 400 V Power Modules, induction motors are permissible in the range from

25 % … 150 % of the converter power without any restrictions.

Motors for 690 V Power Modules
For the 690 V Power Modules, induction motors are permissible in the range from 50

% … 150 % of the converter power without any restrictions.

Continuous development within the scope of product maintenance

Converter components are being continuously developed within the scope of product

maintenance. Product maintenance includes, for example, measures to increase the

ruggedness or hardware changes which become necessary as components are

discontinued.
These further developments are "spare parts-compatible" and do not change the article

number.
In the scope of such spare parts-compatible ongoing development, plug connector or

connection positions are sometimes slightly modified. This does not cause any problems

when the components are properly used. Please take this fact into consideration in special

installation situations (e.g. allow sufficient reserve regarding the cable length).

Summary of Contents for SINAMICS G120

















































































































































































Search results

Summary of Contents for SINAMICS G120

Reviews:

Related manuals for SINAMICS G120

Brands by name

Popular brands

Siemens SINAMICS G120, Installation Manual

Search results

Summary of Contents for SINAMICS G120

Reviews:

Related manuals for SINAMICS G120

Brands by name

Popular brands