Commissioning (software)
4.2 Configuring the system in offline mode
SIMOTION D410
76
Commissioning Manual, 02/2012
3.
In the "Power Unit" dialog, use the order number to select your power unit from the list.
Figure 4-3
Selecting a power unit
4.
In the "Power unit supplementary data", select the component added to the power unit.
The selection of the component depends on the construction type:
–
D410 DP with D410 PN: The SIMOTION D410 snapped directly onto the PM340
power module
–
CUA31 or CUA32: The CUA3x snapped directly onto the PM340. The D410 is
mounted individually on a mounting plate. The D410 is connected to the CUA3x using
a DRIVE-CLiQ cable.
Figure 4-4
Selecting the mounting type