Siemens SIMOTION D410 Commissioning Manual Download Page 18

Page: 18 / 230

Description

1.2 System components

SIMOTION D410

Commissioning Manual, 02/2012

PROFINET

SIMOTION D410 PN can communicate via PROFINET interface to the following

components:

Table 1- 3

Components on PROFINET

Component

Function

The master computer (at

company and production

management level)

... communicates with other devices via Ethernet.

Programming device (PG/PC) ... communicates with the SIMOTION SCOUT Engineering Systems

(ES), STEP 7 and HMI (Human Machine Interface).

SIMATIC HMI device

... is used for operator control and monitoring functions. It is not

absolutely essential for running SIMOTION D410.

Drive units with PROFINET

interface (e.g.

SINAMICS S120)

... convert speed setpoints into signals for controlling the motor and

supply the power required to operate the motors.

Other controllers (e.g.

SIMOTION or SIMATIC)

Distributed I/O systems
TMC

Multi-channel, fast, isochronous I/O for mechanical engineering with

PROFINET IO connection in a rugged SINAMICS S120 booksize

compact format with technology functions; direct connection of the

I/O channels on the module, or separately via wiring modules.

SIMATIC ET 200M

Modular I/O system for control cabinet installation and high channel

densities.

SIMATIC ET 200S

Finely scalable I/O system for control cabinet installation and

particularly time-critical applications; including motor starters, safety

technology and individual grouping of load groups.

SIMATIC ET 200pro

Modular I/O system with IP65/IP67 rating for machine-related

applications with no control cabinet; with new features such as more

compact designs, integrated PROFIsafe safety technology,

PROFINET connection and live module replacement.

SIMATIC ET 200eco PN

Compact block I/O with IP65/66/67 degree of protection for cabinet-

free usage in machines with M12 connection method. Very rugged

and resistant encapsulated metal enclosure.

Other PROFINET I/O
Gateways

•

IE/AS-Interface link PN IO for the PROFINET IO gateway to AS-
Interface

•

PN/PN coupler to connect two PROFINET IO networks

Note
Note that only one real axis can be used on a SIMOTION D410.

Summary of Contents for SIMOTION D410







































































































































































































































Search results

Summary of Contents for SIMOTION D410

Reviews:

Related manuals for SIMOTION D410

Brands by name

Popular brands

Siemens SIMOTION D410, Commissioning Manual

Search results

Summary of Contents for SIMOTION D410

Reviews:

Related manuals for SIMOTION D410

Brands by name

Popular brands