"Device overview" page
When the "SIDRIVE IQ Config" application starts, by default, you see a list of all of the currently
visible assets on the "Device overview" page. You can also display all of the assets visible in the
history. A list entry contains the information about an asset. The following diagram explains the
pictograms in a list entry.
①
To identify an asset, press the motor icon (LED of the connectivity module flashes)
②
You see all of the currently visible assets under this tab.
③
BLE name and MAC address of the currently selected connectivity module
④
Under this tab, you see all of the assets visible in the past.
⑤
Connection status of the connectivity module to the MindSphere application SIDRIVE IQ Fleet
(onboarding status)
• "Green" status: Connected
• "Orange" status: No Onboarding yet
• "Red" status: Error during upload
⑥
Bluetooth interface signal strength display
⑦
WLAN configuration status of the connectivity module:
• "Green" status: WLAN configured and operating correctly
• "Red" status: WLAN not configured or has a fault
⑧
Status of the connectivity module battery:
• "Green" status: sufficient charge
• "Red" status: low charge, 30% or less
Note: Replace the battery in good time. If disturbances occur in data transmission, replace the
batteries (Page 104).
Commissioning
6.2 Commissioning with Android
SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE
25