6.3
Commissioning with iOS
6.3.1
Installing the "SIDRIVE IQ Config" application
1. Open the App Store (
https://apps.apple.com/de/app/sidrive-iq-config/id1578297088
).
2. Install the Siemens "SIDRIVE IQ Config" application.
After the first start of the application, the terms of use are displayed once. Take note of them
and click "Accept" to confirm.
The "SIDRIVE IQ Config" application requires the following access authorizations:
– Bluetooth interface
– Localization data (to determine the asset location)
Note: not available in every country
– Camera (to scan the motor data matrix code)
– Memory (to update the firmware of the connectivity module (Page 97))
SIDRIVE IQ Config is available in the languages German, English, and Chinese. The language is
automatically preset depending on the system language of your mobile device.
6.3.2
Establishing the connection to the connectivity module
Start the "SIDRIVE IQ Config" application on your mobile device. The application automatically
activates the Bluetooth interface of your mobile device, and shows active connectivity modules
in a range of approximately 10 m. The BLE name (=Bluetooth name of the device) set in the
factory is "SC400". You can change the name at a later point in time.
Use the "Identify" function to check that you are connected with the required connectivity
module (Page 83).
Commissioning
6.3 Commissioning with iOS
SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE
51
