background image

Further information

10

10.1

Product information

Further user documentation

• SIDRIVE IQ Fleet Operating Manual (

https://support.industry.siemens.com/cs/ww/en/view/

109769880

)

• SIMOTICS CONNECT 400 Connectivity Kit (

https://support.industry.siemens.com/cs/de/en/

view/109774000

) Installation Instruction

The installation instructions are supplied with the SIMOTICS CONNECT 400 Connectivity Kit 
from the factory.

• Documents for the SIMOTICS CONNECT 400 Connectivity Kit  (

https://

support.industry.siemens.com/cs/de/en/ps/9LD2200-0BA00-0AA0

)

Further information about the motor status monitoring 

• You will find further information about the motor status monitoring here (

http://

www.siemens.com/digital-motor

)

Additional resources

• How to mount SIMOTICS Connect video tutorial  (

https://www.youtube.com/watch?

v=RShjaqjapxo

)

Using open-source software (OSS) 

Open-source software is used in the product SIMOTICS CONNECT 400 either unchanged or 
modified by us. 

License conditions and open-source software used that have to be published are stored on the 
CD-ROM supplied with SIMOTICS CONNECT 400.

10.2

Product support

Technical questions or additional information

If you have any technical questions or require additional information, please contact Technical 
Support (

https://support.industry.siemens.com/cs/ww/en/sc/4868

).

Have the following connectivity module data ready:

• SIMOTICS CONNECT 400 firmware version 

• SIDRIVE IQ Config app version 

SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE

109

Summary of Contents for SIMOTICS CONNECT 400

























































































































Reviews: