3. With the "Back" button, you can check the data that you entered and correct them if
necessary.
With the "Next" button, you call up the dialog box to create a new motor data set.
If the motor is not found in the motor database by a combination of the serial number and
the product article number, you will have to enter the motor data yourself and save them in
the database. This applies both to Siemens motors and to motors of other manufacturers.
Proceed as described below to create a new motor data set.
Procedure - Creating a new motor data set
Note
Settings cannot be modified subsequently
Select the following settings carefully. There is no way of modifying the settings after
onboarding. A subsequent change can only be made by Siemens Service (Page 109).
Creating a new motor data set is explained using the following rating plate as example.
2
3
4
5
6
7
9
1
8
10
21
20
19
18
17
16
14
13
12
11
a
h
g
f
e
d
c
b
15
Commissioning
6.3 Commissioning with iOS
SIMOTICS CONNECT 400
68
Operating Instructions, 08/2021, A5E50161952B AE
