An overview of all of the basic functions is shown in the following table:
Function
Description
Commissioning
Starts the onboarding process for "SIDRIVE IQ Fleet".
Delete Asset (Offboard‐
ing)
The process to disconnect the connectivity module from the MindSphere application "SIDRIVE IQ
Fleet" - including deleting all data - is called offboarding.
Offboarding is the precondition for a new commissioning process (onboarding) to "SIDRIVE IQ Fleet".
Send data to Mind‐
Sphere
Starts transfer of the measurement data from the memory of the connectivity module to "SI‐
DRIVE IQ Fleet".
Precondition: The onboarding process has already been performed.
Battery replacement
Sets the battery status display to 100% after battery replacement (Page 104).
Restart
The connectivity module restarts. The connectivity module is disconnected. Measurement data that
have not yet been transmitted to SIDRIVE IQ Fleet are lost. To avoid this data loss, run the "Send data
to MindSphere" function before you restart the connectivity module.
Reset to factory set‐
tings
Restores the factory settings of the connectivity module. The user credentials are reset to the factory
settings. All saved motor data and onboarding information are deleted.
Reset user credentials
Resets the user name and the connectivity module password to the factory settings.
Note:
This function requires additional entry of the WLAN password. This ensures that only authorized
persons can reset the user login information. If the WLAN has not yet been configured in SC400, the
"WLAN password" field must remain empty.
Identification
(press the motor sym‐
bol)
Helps you to visually identify the currently connected connectivity module. The connectivity module
LED flashes for five seconds.
8.5
Replacing the connectivity module
Connectivity module as a spare part
You can order the connectivity module as a spare part (Page 109). The battery is not connected
and it has no motor parameters. You must configure the device from new.
Maintenance
8.5 Replacing the connectivity module
SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE
103
