Quick Reference
931665A
© 2019, CyberData Corporation, ALL RIGHTS RESERVED
© 2019, CyberData Corporation, ALL RIGHTS RESERVED
931665A
Quick Reference
Typical System Installation
Getting Started
•
Download the
Operations Guide
PDF file, from the
Downloads
tab at the following webpage:
https://www.cyberdata.net/products/011478
•
Create a plan for the locations of your devices.
•
WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes.
•
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
•
WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant.
•
WARNING: This enclosure is not rated for any AC voltages!
Parts
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
802.3af Compliant Ethernet Switch
Endpoint
IP Phone
IP PBX Server
Endpoint
Endpoint
*
More installation and mounting
options are available in the
Operations Guide
.
Accessory Kit Security Torx MS
Accessory Kit
Carriage Bolt Bolts
Carriage Bolt Nuts
Carriage Bolt Washers
Mounting Component
(1) Assembly
(1) 1/2-inch EMT
compression
connector with extra
sealing locknut
(1) 531085* Hole
plug assembly
Optional Accessories
Security Torx Key
The IP Endpoint Company
Installation Quick Reference
SIP Outdoor Video Intercom with RFID
Secure Access Control Endpoint
011478
Gooseneck Mounting
Contacting CyberData
Conduit
Ground Wire
Network Cable
1/2" EMT
Compression
Connector
1/2" EMT
Anchor Screw
1/4"
1/4" Concrete
(Sold Separately)
Weather Shroud
(Sold Separately)
Weather Shroud
Wall Anchor
Backbox
Torx Key
Torx Security Screw
Faceplate Mounting
Torx Key
SIP Outdoor Video Intercom
RFID Access Control Endpoint
(3 Sets Included)
Washer & Nut
Gooseneck
Through Side Conduit Hole
Network and Ground Wires in
Cable & Wire
Create Service Loop
Cable & Wire
Create Service Loop
Apply RTV Silicone Sealant Around Mounting Holes and
Backside Perimeter of Backbox and Weather Shroud
Carriage Bolt, Washer & Nut
Apply RTV Silicone Sealant Around Mounting Holes and
Backside Perimeter of Backbox and Weather Shroud
with
Sealing Locknut
(Sold Separately)
Torx Security Screw
Faceplate Mounting
Remove Hole Plug Assembly then
Install It onto Rear Conduit Hole
*
*
J1
J1
to J1
to J1
*
More installation and mounting information
is illustrated in the
Operations Guide
.
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Support Website:
RMA Department: (831) 373-2601 ext. 136
RMA Email: [email protected]
RMA Status:
Warranty Information:
http://support.cyberdata.net/
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
