Operation
7
7.1
Operation with Android
7.1.1
Offboarding process using the "SIDRIVE IQ config" application
The process for detaching the connectivity module from the MindSphere application "SIDRIVE IQ
Fleet" is called "offboarding". All onboarding information in the connectivity module is deleted.
If you onboarded the asset under "SIDRIVE IQ Fleet" Version 2.0.0 or higher, no further input is
required. If you carried out onboarding under an older "SIDRIVE IQ Fleet" version, you must
specify the tenant under which the asset is registered.
The offboarding process permanently deletes all data stored in "SIDRIVE IQ Fleet", as well as the
asset itself.
The asset instance used is released and is then available for onboarding a new asset under the
relevant tenant.
After offboarding, transmission of measurement data to "SIDRIVE IQ Fleet" is no longer possible.
To transfer data, start a new onboarding process.
Offboarding is the precondition for a new onboarding process to "SIDRIVE IQ Fleet".
7.1.1.1
Initiating the offboarding process
Requirements
• You have logged onto the connectivity module (Page 26).
• The WLAN connection has been set up.
• The SIMOTICS Connect 400 connectivity module is registered with IQFleet.
• You have the role "iqfleet.offboarding" in "SIDRIVE IQ Fleet". If you do not have this role,
offboarding is canceled with an error message "Insufficient rights". Please contact your
"SIDRIVE IQ Fleet" Tenant Administrator.
SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE
79