⑨
Last time of connection of the selected connectivity module with "SIDRIVE IQ Config", with date
and time.
⑩
"Connect" button to establish a connection to the connectivity module
If necessary, confirm a pairing request to establish the Bluetooth connection.
⑪
Update status of the firmware of the connectivity module (display is not supported in the current
version) and display of the currently installed firmware version
⑫
Status of the connectivity module
Procedure
1. Open the "SIDRIVE IQ Config" application.
2. Open the overview page.
3. Select an asset from the "Visible" tab.
4. Tap on "Connect".
6.2.3
Log in with the connectivity module
After a connection has been established from the "SIDRIVE IQ Config" application to the
connectivity module, a window is displayed where you can enter the login data for the
connectivity module. If you do not login, then you will only be able to select a limited number
of functions.
Menus and functions without logging in
You do not need to login to the connectivity module for all menus and functions. You can view
or use the following menus and functions without logging in:
• "Login" menu
• "SIMOTICS CONNECT" menu
Functions "Identification" and "Reset user credentials" can be selected.
• "Settings" menu:
You are automatically routed to the "System settings" submenu. You can view the settings -
however, you cannot change them.
Factory settings for logging in
The factory settings for logging in are as follows:
• User name: "admin"
• Password: Comprising the last 6 digits of the serial number on the rating plate of the
connectivity module.
Caution: Not the serial number of the motor!
Change the user name and the password after the first logon. In the "Device Credentials" step of
the commissioning wizard, you are requested to change the login data. You can also change the
login data in the menu "Settings > User" of the "SIDRIVE IQ Config" application.
Commissioning
6.2 Commissioning with Android
SIMOTICS CONNECT 400
26
Operating Instructions, 08/2021, A5E50161952B AE
