Siemens SIMOTICS CONNECT 400 Operating Instructions Manual Download

Page: 21 / 120

⅔

⅓

Requirements

• The mounting bracket is clean, dry and free of any grease.

• The cooling ribs to which the mounting bracket is to be bonded are thoroughly cleaned, dry

and free of any grease.

• You have carefully read the usage instructions on the adhesive package.

Procedure

1. Mount the connectivity module on the mounting bracket. (Page 20) You can optionally

mount the connectivity module after you have glued the mounting bracket on the motor.

2. Choose the position for the connectivity module on the motor. The following figures show

examples of the position for the connectivity module on the motor.

Mounting and installation

5.1 Installing the mounting bracket

SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE

Summary of Contents for SIMOTICS CONNECT 400

























































































































Search results

Summary of Contents for SIMOTICS CONNECT 400

Reviews:

Related manuals for SIMOTICS CONNECT 400

Brands by name

Popular brands

Siemens SIMOTICS CONNECT 400, Operating Instructions Manual

Search results

Summary of Contents for SIMOTICS CONNECT 400

Reviews:

Related manuals for SIMOTICS CONNECT 400

Brands by name

Popular brands