Siemens SIMATIC ET 200C, Manual

Page: 4 / 333

iv
ET 200C Distributed I/O Station
EWA 4NEB 812 6119-02b
As regards operation of ET 200C with the IM 308-C master interface and
COM ET 200 Windows, this manual describes only parameterization with
COM ET 200 Windows. See the manual entitled ET 200 Distributed
I/O System (order number 6ES5 998-3ES12) for detailed information on how
to use COM ET 200 Windows and on working with the FB IM 308C standard
function block.
COM ET 200 Windows has an online Help system that provides valuable
assistance for starting up and operating the ET 200C modules.
This manual follows on from the manual entitled ET 200 Distributed
I/O System, which is the master description for the series.
You must read and understand the manual ET 200 Distributed I/O System in
order to use this manual.
A number of features in this manual will help you to obtain quick access to
the information you require:
At the start of the manual you will find a general table of contents, plus a
list of all the illustrations and a list of all the tables in the manual.
On each page throughout the manual, the bold-face headings on the left
summarize the contents of the individual passages.
The Appendices are followed by a Glossary containing definitions of the
important terms used in this manual.
The manual closes with a detailed index that you can use to find
information on the topic of your choice.
The ET 200C modules function as DP standard slaves in accordance with the
definitions of DIN E 19245, Parts 1 and 3.
Please address all questions about the ET 200C distributed I/O station to:
Hotline SIMATIC
Erlangen
Phone (+ 49 for Germany) 9131/7-43344
You will find suggestion sheets at the end of the manual. Please note any
suggestions or proposals you may have on these sheets and return them to
use. Your suggestions will help us improve the next edition of the manual.
Scope
of the Manual
(Continued)
Other Important
Manuals
Quick Access
Standards
Questions
Suggestions
Preface