Siemens SENTRON PAC3200T, Product Manual, Page: 132 / 136

Appendix
A.1 Modbus TCP
130
Equipment Manual, 09/2022, L1V30415168B-03
A.1.13 Modbus command parameters
Addressing the command parameters
You can apply the Modbus function code 0x06 to the command parameters.
Table A- 16 Command parameters
Offset Number
of
registers
Name Unit Format Value range Access
60000 1 Reset the device to the factory
settings
— unsigned short — W
60001 1 Device reset (without
changing the Modbus address)
— unsigned short — W
60002 1 Reset maximum values — unsigned short 0 W
60003 1 Reset minimum values — unsigned short 0 W
60004 1 Reset energy counter — unsigned short 0 = all W
1 = Active energy
import tariff 1
2 = Active energy
import tariff 2
3 = Active energy
export tariff 1
4 = Active energy
export tariff 2
5 = Reactive energy
import tariff 1
6 = Reactive energy
import tariff 2
7 = Reactive energy
export tariff 1
8 = Reactive energy
export tariff 2
9 = Apparent energy
tariff 1
10 = Apparent energy
tariff 2
60005 1 Synchronization of the
demand period
min unsigned short 1 ... 60 W
60006 1 Switching tariff — unsigned short 0 = Main tariff W
1 = Secondary tariff
60007 1 Acknowledge the diagnostics
bit
1)
(cf. stored bits in
unsigned long beginning
offset 205)
— unsigned short 0 ... ffffh W