Conducting calls – the basic functions
3
Step by Step
Charging the battery pack
You may only use the charging shell provided for the
handset.
The handset charges when sitting in the charging shell,
even when deactivated. If the handset is active, the
charging status display flashes on the display.
If the handset deactivates because the battery pack is
flat, it automatically reactivates and is ready for opera-
tion as soon as you place it in the charging shell. The
charging operation starts. If a PIN was set, it must be
entered first to allow charging to start.
Language
If your preferred language for the display texts is not
set, you can set this yourself (
Æ
Page 23).
Seize the line first, then dial
or
When the handset is idle: Press and hold down the Talk
key or press the Speakerphone key.
o
Enter the required phone number. The user will be
called.
Typing errors cannot be corrected. If you make a typing
error: Press the On-hook key.
either:
p
The user answers. Conduct the call.
or:
The user is busy or rejects the call.
Press the On-hook key briefly.
Feature not availab-
le.
Please replace hand-
set.
Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional
Page 153: ......
