Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Page 116 Operating Manual Download

Page: 116 / 154

Step by Step

Additional functions

106

Handset appointment reminder func-
tion

You can arrange your handset to remind you up to five
appointments. The handset must be in idle status at the
time of the appointment reminder. The appointment re-
minder function is deactivated during automatic
number redial.

Saving an appointment

The handset is in idle status.

Open the handset’s main menu.

[

Select the menu icon and confirm. The current month’s
calendar is displayed with the current day marked.

[

Select and confirm the required day for the new ap-
pointment reminder. The input mask for entering a new
appointment reminder appears.

[

Select the menu item and confirm.

Define settings.

Move the cursor down one line.

Enter the date, forexample, 11 November = 1111.

Move the cursor down one line.

Enter the time, forexample, 19:05 = 1905.

Move the cursor down one line.

Enter the name for the appointment reminder.

If applicable, delete the old text.

Save the settings.

The appointment reminder function is activated.

Press the On-hook key to end the operation.

Calendar

New Entry

Appoint.: < On >

Date:

Time:

Text:

Save

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Operating Manual

Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands