Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Page 113 Operating Manual Download

Page: 113 / 154

Message functions

103

Step by Step

Calling back a caller

Call the menu.

> <

[

Select the menu item and confirm. The connection is
set up.

Adding a caller to the caller list

During a call, you can save the other party’s phone
number in your caller list, forexample, to remind you to
call again later.

Call the system menu.

> <

[

Select the menu item and confirm. The caller’s phone
number is saved.

Deleting a caller from the caller list

Press and hold down the Talk key or press the Speaker-
phone key.

Call the system menu.

> <

[

Select the menu item and confirm. The first call request
is displayed.

Select a call request.

Call the menu.

> <

[

Select the menu item and confirm. The call is deleted.

Press the On-hook key to end the operation.

Mnu

Call?

Note:

If a connection is established, the user is auto-
matically deleted from the caller list. Call re-
quests for groups (hunt group/group call) are
also deleted if a member of the group has set up
the connection.

If the "Save number?" option is not displayed, all
external incoming calls are automatically saved.

Menu

Save number?

Menu

Missed Call List?

Mnu

Delete?

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Operating Manual

Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands