Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Operating Manual Download Page 50

Page: 50 / 154

Step by Step

Setting the handset

Resetting the defaults

This function allows you to reset your mobile phone to
the defaults, forexample, if you want to pass it on to
someone else or reset it.

The handset features are handled as follows:

Resetting

Open the handset’s main menu.

[

Select the menu icon and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm. A security check
question appears.

Confirm the security check question. The handset is re-
turned to the default.

Feature

Action

Sound settings

are reset

System registration

is retained

Phonebook

is retained

Redial list

is deleted

H/Set Settings

Handset

Reset Handset

Yes

Note:

For information about deleting the telephone di-
rectory see:

Page 56.

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Operating Manual

Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands