Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Page 94 Operating Manual Download

Page: 94 / 154

Step by Step

Conducting calls – with multiple users

You are connected with two or more partners in a con-
ference call.

Call the system menu.

> <

[

Select the menu item and confirm. Conference is
placed "on hold", the users wait.

Enter the phone number of the new user.

The user is free and answers the phone. You announce
the conference.

Call the system menu.

> <

[

Select the menu item and confirm. The new user is in-
cluded in the conference call.

Ending a conference

You are connected with two or more partners in a con-
ference call.

Call the system menu.

> <

[

Select the menu item and confirm. The conference is
ended.

Leaving a conference

Press the On-hook key. You leave the conference.

When one user leaves the conference, the other two
users remain connected.

Viewing the names of conference parties

As the convener of the conference, you can view the
names of all conference parties.

You are connected with two or more partners in a con-
ference call.

Viewing the conference parties list

Call the additional menu.

> <

[

Select the menu item and confirm. The first party is dis-
played.

View other parties.

Menu

Add party?

Menu

Conference?

Menu

End conference?

Mnu

View conf parties?

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Operating Manual

Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands