Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Page 40 Operating Manual Download

Page: 40 / 154

Step by Step

Setting the handset

Setting the sound volume during playback

Open the menu.

[

Select the menu item and confirm. The volume can be
set to five different levels in the input mask.

u v

Adjust the volume.

Save setting.

Renaming a sound/picture

Open the handset’s main menu.

[

Select the menu icon and confirm.

[

Select the required menu item and confirm.

s t

Select the entry.

Open the menu.

[

The name of the entry can be modified. Length: up to
16 characters. Then confirm your entry.

Press the On-hook key to end the operation.

Deleting sounds/pictures

A sound or a picture that cannot be deleted is marked
with

. In this case, the functions listed below are not

available.

Open the handset’s main menu.

[

Select the menu icon and confirm.

[

Select the required menu item and confirm.

s t

Select the entry.

Open the menu.

either:

[

Select the menu item and confirm. The selected entry
will be deleted.

Options

Loudspeaker Vol
...

Save

Resource Dir.

Screensavers
Caller Pictures
Sounds

Options

Rename

Resource Dir.

Screensavers
Caller Pictures
Sounds

Options

Delete Entry

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Operating Manual

Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands