Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Operating Manual Download Page 55

Page: 55 / 154

Conducting calls – enhanced functions

Step by Step

Conducting calls via the Bluetooth headset

Activating the Bluetooth headset during a call

If the handset is in dial or call mode (see

Page 3 for

information on setting up a call), the Bluetooth headset
can assume the receiver inset and microphone func-
tions.

Press the Talk key on the Bluetooth headset (see the
user manual supplied with your headset).

Accepting a call on the Bluetooth headset

The headset uses a call tone to signal an incoming call.
Press the Talk key on the Bluetooth headset (see the
user manual supplied with your headset).

Deactivating the Bluetooth headset during a call

You are conducting a call via the Bluetooth headset.

Press the Talk key or Speakerphone key on the handset.
The Bluetooth headset is deactivated. You can continue
the call directly on the handset.

De-registering the Bluetooth headset at the hand-
set

To improve protection against unauthorised tapping, de-
register the Bluetooth headset at the handset if you no
longer wish to use it.

Open the handset’s main menu.

[

Select the menu icon and confirm.

[

Select the menu item and confirm. The Bluetooth menu
is displayed.

[

Select the menu item and confirm. The name of the
registered or detected Bluetooth headset is displayed.

Open the handset’s menu

[

Select the menu item and confirm. The Bluetooth head-
set is de-registered and can no longer be detected by
the handset.

Data Transfer

Bluetooth

Trusted Devices
S55 Headset

Options

Delete Entry

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Operating Manual

Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands