Siemens gigaset SX761 DSL Manual Download

Page: 75 / 118

Call guide

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / telefone.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Call waiting and call reject if busy

Confirmation tones

If you activate a service attribute, for example set up call forwarding, you will hear a pos-

itive confirmation tone if successful and a negative confirmation tone if unsuccessful.

*43#

Allow call waiting

Use the key combination

*43#

allow call waiting when the line is

busy.

#43#

Delete call waiting

Dial

#43#

to disable call waiting if

busy again.

*26#

Reject all calls

Use the key combination

*26#

specify that all calls are to be rejected.

This is only possible if call waiting is

disabled.

#26#

Delete the reject calls

setting

Use the key combination

#26#

delete the reject all calls setting.

Notes:

If you additionally enter

in each case before the key combination shown in the

table, the settings will be forwarded directly to the exchange and will be activated

there.

The phone numbers of waiting calls are not displayed even if the caller permits

this.

Positive confirmation tone:

Ascending tone sequence at 6-second intervals

Negative confirmation tone:

Regular sequence of short low-frequency tones

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands