Siemens gigaset SX761 DSL Manual Download

Page: 17 / 118

First steps

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / device_761.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Reset button

The underside of the Gigaset SX761 dsl houses the reset button.

Reboot function

: Press and hold the right end of the button for more than 1 second but

less than 5 seconds to reboot the device. This does not affect the configuration settings.

Reset function

: Press and hold the right end of the button for at least 5 seconds to

return all settings to factory settings.

Warning

: This will clear all the configuration settings you have made since the initial

startup.

Updated firmware will not be affected.

Reset button

Label

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands