Siemens gigaset SX761 DSL Manual Download

Page: 107 / 118

107

Glossary

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / glossary.fm / 06.10.2008

Schabl

one 2

005_0

7_2

MAC address

Media Access Control
The MAC address is used for the globally unique identification of a

Network adapters

. It

comprises six parts (hexadecimal numbers), e.g. 00-90-96-34-00-1A. The MAC address

is assigned by the network adapter manufacturer and should not be changed.

Mbps

Million bits per second
Specification of the transfer speed in a network.

MER

MAC Encapsulated Routing

MRU

Maximum Receive Unit
The MRU defines the maximum user data volume within a data packet.

MTU

Maximum Transmission Unit
The MTU defines the maximum length of a data packet that can be carried over the net-

work at any one time.

NAT

Network Address Translation
NAT is a method for converting IP addresses (

Private IP addresses

) within a network into

one or several

Public IP addresses

on the

Internet

. With NAT, several network compo-

nents in a

LAN

can share the router's public IP address to connect to the Internet. The

network components of the local network are hidden behind the router's IP address reg-

istered on the Internet. Because of this security function, NAT is frequently used as part

of the

Firewall

of a network. If you want to make services on a PC in the local network

available on the Internet despite NAT, you can configure the Gigaset SX761 dsl as a

Vir-

tual server

Network

A network is a group of devices connected in wired or wireless mode so that they can

share resources such as data and peripherals. A general distinction is made between

local networks (

LANs

) and wide-area networks (

WANs

Network adapter

The network adapter is the hardware device that creates the connection between a net-

work component and a local network. The connection can be wired or wireless. An Eth-

ernet network card is an example of a wired network adapter.
A network adapter has a unique address, the

MAC address

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands