Siemens gigaset SX761 DSL Manual Download

Page: 9 / 118

The Gigaset SX761 dsl

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / introduction.fm / 06.10.2008

Schabl

one 2

005_0

7_2

You can choose whether to connect any two analogue phones, a fax machine or an

answering machine to the phone ports. You can configure these ports using the Gigaset

SX761 dsl.
The PABX of the Gigaset SX761 dsl allows you to connect PCs with SIP clients (software

for Internet telephony) as extensions. You can use all functions of your PABX for Internet

telephony also.
You will need the relevant access data for your VoIP provider to configure Internet

telephony.

Via registration button

The access point (e.g. the Gigaset SX761 dsl) has a registration button. The registra-

tion button is available either:
– as hardware: a specific button (labelled

Scan

) is provided on the device’s back

panel.

– as software: registration can be started via the

WPS Registration

page of the

user interface.

In the description that follows, the term registration button refers to both the

Scan

button and the corresponding function in the user interface.
Depending on your hardware version, WPS registration may only be possible via the

user interface.

Please remember:

You can only be reached via the Internet (VoIP) when an

active Internet connection

is established.

Internet

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands